Uniden UH-048XR - Manual (Page 11)

SELECTING CHANNEL
1. Press [Function] until
“ ” appears in the
large display. The current
channel flashes.
2. Press [
▲
] or [
▼
]
to select the desired
channel
3. Press [ ] to
confirm your selection, otherwise, the radio will
automatically return to standby and the new channel
will be displayed.
Note: If you press and hold the [▲] or [▼], channel numbers
will scroll rapidly.
Note: If a step is not completed within 5 Secs., the UH048XR
will automatically return to standby. Thus, you have to
start again from the first step.
TO TRANSMIT AND RECEIVE
The UH-048XR uses the 40 UHF-CB Channels. For
your reference a list of the available channels and
corresponding frequencies is printed at the end of this
manual.
1. The maximum RF transmit power of UH-048XR
is 500 mWatts.
2. Before you transmit, listen for activity on the
selected channel.
3. When the channel is clear, press and hold the
[PTT] to transmit.
Power/Enter
Function
Monitor
8