Unitech ENTERPRISE PA500 - Manual (Page 48)

42
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Checking Main and Backup Battery Status
View power level for both the main and backup battery. To minimize power consumption, you can define
settings for the auto-off function and the processor’s operation speed.
To check the main and backup battery status:
1. Tap Start → Settings.
2. On the System tab, tap Power.
3. Do either of the following:
– If the Plug or Battery icon appears on your device, double-tap the icon to bring the
Power settings screen.
– Tap Start > Settings > System tab > Power.
4. The battery tab will show the status of the main and backup batteries. There are four kinds of
status icons, Good , Low , and Very Low or , that may appear on the top of the Today
screen to indicate main battery or backup battery status. For more information on the battery
status icons, see page 17.
NOTE:
It is necessary to charge the main battery when the Low is displayed. To prevent
data loss, replace or recharge the device when the Very Low or status icons are
displayed. If both icons are still displayed after charging, pleas. contact unitech
Technical Support.