Powering on the pa500 – Unitech ENTERPRISE PA500 User Manual
Page 14
8
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Powering
On the PA500
After you have initially charged your device for about 16 hours, the device is ready to be used. You can
now start up your device where you’ll calibrate the display, set up the system time zone, and learn some
basic stylus usage.
1.
Turn on your device by pressing the Power button
on the front panel.
NOTE:
The PA500 screen ships with a protective plastic film. You may remove this if desired
by peeling from one corner. The screen will be more susceptible to scratching without
the film, but will be more readable.
The unitech PA500 welcome screen appears. The Windows Mobile screen will appear shortly
thereafter.
2.
Calibrate the PA500
The calibrate screen will automatically appear when the unit is powered-on for the first time or
after the system is reset. This screen can also be accessed at any time by tapping Start
→
Settings
→ System tab → Screen.
The PA500 will prompt you to calibrate the unit by tapping a sequence of screen locations. Tap
gently but firmly. When you have completed the series of taps, press the Enter button to confirm
it.
3.
Set the Time Zone, Date, and Time
Select your current time zone from the Time zone drop-down menu, then tap Next.
4.
Follow all onscreen instructions to complete the set up. The setup wizard provides tips for using
the pop-up menus and assign a lock password to access your device.
After the device setup, you can create an ActiveSync partnership to synchronize information
between your computer and your device. See
Establishing Device-PC Connection
for detailed instructions.