Using the charging base, Programming the mx-980 – Universal Remote Control (URS) URC Home Theater Master MX-980 User Manual
Page 7
Page 4
MX-980 O
WNERS
M
ANUAL
Using the Charging Base
Plug the 5V DC adapter into a
power outlet and into the back of the
charging base.
Gently place the MX-980 into the
cradle of the charging base.
The Status light should immediately
light. Red indicates that it is charging.
Blue shows that it is fully charged.
There is no harm in leaving the MX-
980 on its charging base whenever it
is not in use. The Lithium Ion battery
cannot be overcharged.
Programming the MX-980
The MX-980 is programmed via a Windows PC equipped with a
USB port (programming cable included), using our proprietary soft-
ware, MX-980 Editor. You could download this software from our
website:
www.universalremote.com
However, although some enthusiasts have learned to use the setup
software, to fully automate an audio/video system the user must
have a detailed knowledge of how the system is connected and
operated. We highly recommend that you use a professional
audio/video installer to program your MX-980 so you will be able
to enjoy all the benefits of the MX-980 as well as one touch opera-
tion via macros.
The MX-980 on it’s Charger.