Uniden VOYAGER - Manual (Page 11)

Attaching the Battery Pack
Place the battery pack onto the back of
the radio. It will only fit in one way.
Snap the battery release clip until it
clicks. Be sure the battery pack fits
tightly against the VOYAGER’s body.
Attaching the Beltclip
Hold the beltclip in the direction as
follows.
Apply it to the hanger piece on the back
of the radio. Then slid it up.
You will hear a click. The beltclip is
firmly attached.
To take the beltclip off the radio, turn it
and slid it up. 4
3
2
1
2
1
9
Contacts
VOYAGER.QX 11/19/2 2:19 PM Page 9