Uniden BT-1007 - Manual (Page 5)

AC Adapter and Battery Information
x Use only the supplied AC adapter. Be sure
to use the proper adapter for the base.
x Do not place the power cord where it
creates a trip hazard or where it could
become chafed and create a fire or electri-
cal hazard.
x Do not place the unit in direct sunlight or
subject it to high temperatures.
x Fully charged, the battery should provide about 10 hours of talk time and about 7 days of standby
time. For best results, return the handset to the cradle after each call to keep it fully charged.
x When the battery gets too low, the handset shows a low battery alert. If you hear a strange beep dur-
ing a call, check the display: if you see the low battery alert, finish your conversation as quickly as pos-
sible and return the handset to the cradle. If the handset is in standby, none of the keys will operate.
x With normal use, the battery should last about one year. Replace the battery when the talk time
becomes short even when the battery is charged. To buy a replacement battery, call the Parts
Department listed on the front cover.
Rechargeable Nickel-Cadmium battery warning
x This equipment contains a rechargeable Nickel-Cadmium (Ni-Cd) battery.
x Cadmium and Nickel are chemicals known to the state of California to cause cancer.
x Do not short-circuit the battery.
x The rechargeable Ni-Cd batteries contained in this equipment may explode if disposed of in a fire.
x Do not charge the battery used in this equipment in any charger other than the one designed to charge
this battery as specified in the owner's manual. Using another charger may damage the battery or
cause it to explode.
x As part of our commitment to protecting our environment and conserving
natural resources, Uniden voluntarily participates in an RBRC ® industry program
to collect and recycle used Ni-Cd batteries within the United States. Please call
1-800-8-BATTERY for information on Ni-Cd battery recycling in your area.
(RBRC ® is a registered trademark of the Rechargeable Battery Recycling Corporation.)
Rechargeable batteries must be recycled or disposed of properly. Uniden works to reduce lead
content in PVC coated cords in our products and accessories.
Warning! The cords on this product and/or accessories contain lead, a chemical known to the
state of California to cause birth defects or other reproductive harm. Wash hands after handling.
Compliance Information
FCC Part 68 Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that contains, among other information, a product
identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the
phone company.
An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equip-
ment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A
plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a phone line.
Excessive RENs on a phone line may result in devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total RENs, contact the
telephone provider. The REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a
REN of 0.3).
If this equipment causes harm to the telephone network, the telephone company will notify you
in advance that temporary discontinuance of service may be required. But if advance notice isn't
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone
company may make changes in its facilities, equipment, operations or procedures that could affect
the operation of the equipment. If this happens the telephone company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted service.
Please follow instructions for repairing, if any (e.g. battery replacement section); otherwise do not
substitute or repair any parts of the device except as specified in this manual. Connection to party
line service is subject to state tariffs. Contact the state public utility commission, public service
commission or corporation commission for information. This equipment is hearing aid compatible.
If you experience trouble with this equipment, contact the manufacturer (see the cover of this
manual for contact information) or an authorized agent. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the equipment until
the problem is resolved.
If your home has wired alarm equipment connected to a phone line, be sure that installing the
system does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, contact your telephone company or a qualified installer.
Any changes or modifications to this product not expressly approved by the manufacturer or other
party responsible for compliance could void your authority to operate this product.
NOTICE: According to telephone company reports, AC electrical surges, typically resulting from
lightning strikes, are very destructive to telephone equipment connected to AC power sources. To
minimize damage from these types of surges, a surge arrestor is recommended.
FCC Part 15 Information
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this phone.
FCC PART 15.105(b): Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
AC
adapter
Part number PS-0035
Input voltage 120V AC, 60 Hz
Output voltage 8V AC @ 300mA
Battery
pack
Part number BT-1007
Capacity 500mAh, 2.4V DC