Racing Electronics BC72XLT - Manual (Page 52)

52
Troubleshooting
Scan
won’t stop
(continued) The antenna
might need to
be adjusted. Check the antenna
connection.
One or more
channels might
be locked out. Make sure the
channels you want
to scan are not
locked out.
The channel’s
frequency
might not be
stored in
memory. Make sure the
channel’s
frequency is stored
in the scanner’s
memory.
The channel
might not be
active. Wait for a
transmission on the
channel.
Scan
won’t
start. You must
press Scan to
scan. Press Scan.
The squelch
might need to
be adjusted. Adjust the squelch
threshold. See
“Turning On The
Scanner and
Setting Squelch” on
Page 33.
One or more
channels might
be locked out. Make sure the
channels you want
to scan are not
locked out.
The antenna
might need to
be adjusted. Check the antenna
connection.
BC72 Paper OM.fm Page 52 Monday, October 25, 2004 3:11 PM