Universal Remote Control (URS) URC-4041 - Manual (Page 13)

Clearing The Master Power Macro
1. Press and hold SET until the LED (red light)
blinks twice, then release SET .
2. Enter 9 - 9 - 5 . The LED will blink twice.
Then press POWER once.
3. Press and hold SET until the LED blinks
twice, then release SET . The Master Power
Macro is now cleared.
USING KEYMOVER
The One For All DVD Expert Universal Remote Control
includes a Keymover feature that allows you to map
(or copy) keys from one mode (i.e., source mode) to
another mode (i.e., destination mode).
NOTE: The following keys should not be used as a source or
destination: DVD/VCR, AUX, CBL/SAT, TV, SET, FAV, and REC.
Programming Keymover
For example, if your DVD player does not have volume
control, you can map those keys (i.e.,
VOL ▲ , VOL ▼ , and
MUTE ) from TV mode to DVD/VCR mode as follows:
1. Press and hold SET until the LED (red light)
blinks twice, then release SET .
2. Enter 9 - 9 - 4 . The LED will blink twice.
3. For the source mode, press TV once.
4. For the source key, press VOL ▲ once.
5. For the destination mode, press DVD/VCR
once.
6. For the destination key, press VOL ▲ once.
7. The LED will blink twice, indicating the
keymoved sequence is correct.
8. Repeat steps 1 through 7 twice more to
map remaining volume control keys,
substituting
VOL ▼ and MUTE as source and
destination keys in steps 4 and 6.
continued on next page...
13
IMPVE4P manual 1.0 4/11/03 4:34 PM Page 13