Operation, Selecting the call tone, Roger beep – Uniden UH400SX User Manual
Page 28
UNIDEN Model UH400SX, UH400SX-RM, UH500SX, UH500SX-RM OM
26
Selecting the Call tone
1. Press
[MENU/ENTER]
four times.
The call tone setting fl ashes.
2. Turn the Rotary Channel Selector at
the base or press
on the
Remote SPK/MIC to change the
setting between 1, 2, 3, 4 and 5.
3. Press
[MENU/ENTER]
to store the setting.
4. Press and hold
[MENU/ENTER]
to exit
from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will automatically
exit the Menu Mode.
Roger Beep
1. Press
[MENU/ENTER]
six times.
The roger beep setting fl ashes.
2. Turn the Rotary Channel Selector
at the base or press
on the
Remote SPK/MIC to change the
setting between ON or OFF.
3. Press
[MENU/ENTER]
to store the
setting.
4. Press and hold
[MENU/ENTER]
to
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will automatically
exit the Menu Mode.
Operation
uh400sx, uh500sx, uh400sx-RM, uhSec1:26 Sec1:26
uh400sx, uh500sx, uh400sx-RM, uhSec1:26 Sec1:26
1/2/08 1:31:28 PM
1/2/08 1:31:28 PM