Uniden Cordless Telephon - Manual (Page 22)

BASICS
[ 21 ]
• If you set the ringer to
Off, the ringer tone will
not sound.
2) Press + or - to move the pointer to “ Ringer Tones ”,
then press select/ch.
You can choose from 6 ringers or 4 melodies:
- Ringers [Flicker, Clatter, Leap Frog, Ping Ball, Reminder,
Soft Alert]
- Melodies [Beethoven9, For Elise (Elise), Merry Christmas
(Merry-Xmas), Home Sweet Home (Hm Swt Hm)]
3) Press + or - to move the pointer. You will hear the ringer or
the melody as you scroll through the options.
4) Press select/ch and you will hear a confirmation tone.
5) Press end to exit.
B A S I C S
• See ”Storing Phone
Numbers, Names,
Distinctive Rings, and
Speed Dial” on page 27
for storing a Distinctive
Ring in the Phonebook.
“Distinctive Ringer” allows you to preset memory locations with a designated ring tone.
When an incoming call is received and the Caller ID information matches the information in
one of the memory locations, the Distinctive Ring that has been stored for that particular
caller will sound.
If you have set multiple memory locations with distinctive rings, switching the setting to
“
Distinctive Off ” will result in no distinctive ringing. All incoming calls will have a
normal ring tone. Switching to “ Distinctive On ” will activate all programmed
distinctive ring memory locations.
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to “ Distinct. Ring ”,
then press select/ch.
3) Press + or - to choose “ Distinctive On ” or
“ Distinctive Off ”.
4) Press select/ch, and you will hear a confirmation tone.
5) Press end to exit.
Distinctive Ringer Setup
TRU5865_OM_B6 7/17/02 4:09 PM Page 21