Uniden 550W User Manual

Page 11

Text mode
Original mode

1. Press and hold the wx/ctcss button for

2 seconds. The code indicator flashes.

2. Press the up or down button repeatedly to select one of the CTCSS codes (0-38).
3. After selecting the desired CTCSS code, press the wx/ctcss button again. The code

indicator stops flashing.

4. To turn off the CTCSS code, press the

up or down button until the code
is selected. Then press the wx/ctcss
button again. The code indicator
stops flashing.

You must press the wx/ctcss button within 10 seconds or the unit will
time out. If not, the setting will not be made.

If the code

is selected on your radio, you can receive any signal on

that channel regardless of the CTCSS code settings of the people in
your party.

FRS550W.qxd 7/25/00 18:10 Page 8