Tanita BD-815U - Manual (Page 11)

GB GB
21
Various Setting Methods
20
Press key. (Beep sound)
1
Three types of setting, namely “Display Hold Time” and “Auto Power
Off Time” can be used on this scale.
3
Press key while the screen is
flashing. (Beep sound)
2
Display Hold Time
Press key. (Beep sound)
The hold time is shown (the default is 10 seconds), and the display changed by
pressing this key.
* The hold times that can be set are 10 seconds, 20 seconds, 30 seconds, or -- (None).
-- (None) means the hold function is deactivated.
3
To complete to set the hold time,
press again.
(Beep sound)
4
Auto Power Off Time
To complete to set the auto power
off time, press again.
(Beep sound)
To save and complete that setting.
4
You can set certain seconds to keep the measurement on the display after remov-
ing the baby.
The “Auto Power Off Time” setting automatically turns off the power
when the scale is unused for the specified length of time.
s s
s s
t t
t
t
s
Press key. (Beep sound)
The auto power off time is shown (the default is 15 minutes), and changed by,
pressing this key.
* The auto power off times can be set are 15 minutes, 30 minutes, 45 minutes, 60 minutes, or
-- (None).
--(None) means that the auto power off function is deactivated.