Tanita BD-815U - Manual (Page 10)

GB GB
19 18
Memory Function for Measured Values
Press the key.
(Beep sound)
* When the previous reading is memorized, the
“Memory” pointer is shown.
Pressing the key overwrites the
existing record with the currently dis-
played value as the new memorized value
while the display is on hold.
Memory Function
When the key is pressed while the display is on hold, the dis-
played value is memorized.
1
Press the key while
is displayed.
The memorized value is deleted, and the
“Memory” pointer disappears.
1
Memory Value “Recall” Method
This function is used to check the value memorized previously.
Press the key.
(Beep sound)
The value memorized previously is shown
for 5 seconds.
* This key is valid only when this scale has a mem-
orized weight.
1
Display Weight Gain
Place the baby on the baby basket.
(Beep sound)
1
“Memorize” the weight before breastfeeding, and then take another
measurement after breastfeeding. The increase is calculated automati-
cally, by pressing weight gain.
2
5 seconds
Caution
• When checking the weight gain for another baby, be sure to memorize his/her
weight before measuring the weight gain. Each baby’s weight must be record-
ed before and after breastfeeding for accurate measurement of the breastfeed-
ing amount.
< Display is on hold >
Memory cancellation
Press the key. (Beep sound)
“The currently displayed value – memorized
value” is displayed as the weight gain
(breastfeeding amount) for 5 seconds.
* If the new reading (after breastfeeding) is less than the memorized value (before breast-
feeding), a minus sign (–) is displayed.