Toshiba IK-65WDA - Manual (Page 6)

6
5.CONNECTIONS AND OPERATIONS :
5.1 Basic connection for a single system configuration
Keyboard
Rx
Rx
Notes on connecting
• Power plugs of connected equipment must be disconnected before installations.
• A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection.
• For details of wiring and operation of equipment to be connected, refer to their
operation manuals.
• Lenses, coaxial cables for video signals and the power cord are not supplied with
the camera.
Refer to the operations manuals of connected equipment for detailed wiring and
overall operation instructions.
Do not overload power supply
Since this camera uses 24V AC UL Listed Class 2 power supply or 12V DC power
supply, it should be connected to a power supply that allows for at least 7w con-
sumption.
CAUTION: Never input 24V AC and 12V DC at the same time.