Trango Broadband M2400S - Manual (Page 21)

Basic Configuration via Browser Interface
Trango Broadband Wireless — User Manual M2400S Rev A Page 17
On this page the user can immediately see which SUs are currently associated. In the page shown, SU ID# 1 is
associated, and SU ID# 17 is not. Consider "Power Off" status synonymous with "not associated."
RF Link
Loopback Test
The RF Link Loopback
Test is one of the built-in
tools for evaluating the
quality of the wireless link.
Specify an SU ID and time
in minutes to conduct the
test. The test is prioritized,
so it will take precedence
over all other traffic. 1600
byte packets are sent and
received between the SU
and AP at 50 millisecond
intervals over the time
specified.