Tekkeon MP3450-10 - Manual (Page 11)

9 USER GUIDE
View myPower ALL Plus Battery Capacity
The capacity in myPower ALL Plus will decrease as the battery powers and/or charges your devices.
The remaining capacity is shown on the voltage indicator, which is accessed as described below. As the
remaining capacity decreases, the lights will turn off in sequence from right to left. When the myPower
ALL Plus battery capacity is low, only the first capacity indicator will be on. You should recharge
myPower ALL Plus at this time. When myPower ALL Plus is completely out of battery, all lights will be
off. At this point, you must charge myPower ALL Plus.
1. With the power switched to OFF, or when the power button is switched to ON and the device is
connected, press and hold the voltage selector. When you release the voltage selector, the battery
capacity indicators will turn off, and one indicator will turn on to indicate the voltage selection.
1st Blue Indicator 1-5% (Recharge before using)
2nd Blue Indicator 5-15%
3rd Blue Indicator 15-25%
4th Blue Indicator 25-40%
5th Blue Indicator 40-55%
6th Blue Indicator 55-70%
7th Blue Indicator 70-85%
8th Blue Indicator 85-100%
CAPACITY INDICATOR