Tascam 424MKIII User Manual
Page 16
Switching TAPE CUE on
Monitor selection
Locating tape to zero
Begin to play
Listening level
adjustment
Routing tape signals to
TAPE CUE
Stop play
Track 1 playback through TAPE CUE
1.
Set the EFFECT 2/TAPE CUE selection switch located below the
LEVEL control to the right/TAPE CUE position.
2.
Slide the MONITOR SELECT LINE OUT switch to the center
MONO position.
3.
Press the RTZ key. The tape will rewind, automatically stopping at
the zero counter point.
4.
Press PLAY.
5.
Turn the MONITOR LEVEL control up or down to the desired
listening level.
6.
Locate the EFFECT 2/TAPE CUE level control on channel 1 and
slowly turn it to the right. You'll hear, in center mono, what you
have recorded on track 1.
7.
Press STOP to stop play.
18