Tannoy ACTIVE STUDIO MONITORS - Manual (Page 38)

38
iDP SOFT ™ (cont.)
During Software upload various messages could be displayed:
Example:
“Precision monitor updated successfully” means the Precision monitor has been updated successfully.
Precision iDP™ monitor updated successfully
If the message: “Failed to update Precision iDP™ monitors” – means the monitor has reported an error during software
upload. This could be caused by communication errors. Please retry.
Press to exit screen and execute AutoDetect command if marked.
System Setup
Select your current setup.
Range: +9dBu, +15dBu, +21dBu or +27dBu
Set to match analog Input gain to match the signal fed to
the optional Analog Input card.
BNC Sync On:
The monitor attempts to lock on the word clock BNC.
A C T I V E S T U D I O M O N I T O R S