TDK Module blu2i - Manual (Page 4)

Functions 1
The blu
2i Module contains a complete Bluetooth interface and requires
no further hardware to implement full Bluetooth communication. The
module has an integrated, high performance antenna together with all
RF and Baseband circuitry, it interfaces to the host over a straight
forward serial port using AT commands. The module runs specific
firmware within the Virtual Processor that includes a serial Port Profile
and AT command interpreter. The module can be configured so that it
can be attached to a ‘dumb’ terminal or attached to a PC or PDA for
cable replacement applications.
The module provides access to 5 General I/O lines and 2 analogue I/O
lines to provide Bluetooth connection to simple devices such as switches
or LEDs without requiring any processing at the module end.
blu
2i
Module features at a glance:
Feature Implementation
Bluetooth Transmission Class 1
Frequency 2.400 – 2.485Ghz
Minimum Transmit Power +0dBm
Maximum Transmit Power +6dBm
Receive Sensitivity Better than -85dB
Antenna Gain +2dBi
Range (see Section 6.1.3) Up to 100 metres, free space
Data Transfer Rate Up to 200Kbps
Physical size 24 x 69 x 5 mm
Weight 8g
Fully Bluetooth pre-qualified
Bluetooth 1.1 PRODUCT listing
Current consumption Less than 36mA during data
transfer
Temperature Range -20°C to +75°C
Audio Audio can be transferred over
SCO channels through the PCM
interface at 64Kbps
4 of 36