TDK Module blu2i - Manual (Page 23)

5.6 Reliability
Parameter Minimum Maximum
Thermal Shock 200cycles -40ºC
/+85ºC 30 min 1 cycle/hour
Vibration Continuous operation
at 60 Hz, 2mm stroke 15g max sine wave,
12 hours
Shock 50G 11ms Half Sine
Wave 6 axis x 3 cycles each
axis
Moisture Resistance
High Temp Storage 85ºC, 360 hours
Low Temp Storage -40ºC, 240 hours
High Temp/Humidity
Operation 60ºC, 90%RH, 360
hours
High Temp/Humidity
Storage
Thermal shock -40 to 60ºC in 30min 200 cycles with
continuous operation
Electro Static
Discharge EN55024:1998 &
IEC61000-4-3
Drop Test 75cm to concrete, 3
axis x 2 cycles per
corner
23 of 36