True Manufacturing Company GDIM-26 - Manual (Page 19)

17 17
............ www.truemfg.com ............
MAINTENANCE, CARE & CLEANING
True Food Service Equipment, Inc.
WARNING
Disconnect power to cabinet before
replacing light bulbs.
IDL (INTEGRATED DOOR LIGHTING):
• Squeeze the plastic lampshield together and pull away
from the door (See Image 1).
• Push the bulb down while pulling the spring
activated lampholder up. This will give you enough
clearance to take the bulb out (See Image 2).
LIGHT BULB REPLACEMENT
1
2
IDL (Integrated Door Lighting)
IDL (Integrated Door Lighting)
Recommended cleaners for certain situations / environments of stainless steel
A) Soap, ammonia and detergent medallion applied with a cloth or sponge can be used for routine
cleaning.
B) Arcal 20, Lac-O-Nu Ecoshine applied provides barrier film for fingerprints and smears.
C) Cameo, Talc, Zud First Impression is applied by rubbing in the direction of the polished lines for
stubborn stains and discoloring.
D) Easy-off and De-Grease It oven aid are excellent for removals on all finishes for grease-fatty acids,
blood and burnt-on foods.
E) Any good commercial detergent can be applied with a sponge or cloth to remove grease and oil.
F) Benefit, Super Sheen, Sheila Shine are good for restoration / passivation.
NOTE:
The use of stainless steel cleaners or other such solvents is not
recommended on plastic parts. Warm soap and water will suffice.
Stainless Steel Equipment Care and Cleaning