Topcom BUTLER 4570 User Manual

Page 22

Topcom Butler 4570

•

Select Terminal Number with the navigator and press OK.

•

The number "0" is pre-set. To change it: Enter the preferred number (from 0 to 9) and
confirm with OK.

If you have already created personal user accounts, your Butler 4570 will not allow you to
allocate a terminal number that corresponds to an existing user number. If two SMS-enabled
telephones connected up to the same line have the same terminal number, neither will be
able to receive SMSs. They must be given differing numbers. E.g. If you have already created
a user account with the number "3", you must allocate a terminal number other than "3".
If you keep the pre-set terminal number "0" in your Butler 4570 and your telephone number
is 123456789, your correspondents can continue to send you SMSs at 123456789. If you
give the terminal a number other than "0", you must tell your correspondents so that they can
continue to send you SMS messages: they will need to affix the terminal number to your
telephone number. E.g. If you give your Butler 4570 the terminal number "3" and your
telephone number is 12346789, your correspondents will need to send their SMSs to:
13456789 3.

9.6 SET SMS ALERT TONE

Your handset can play a different melody, a morse beep or a discreet tone to announce a
new text message.
•

Select Menu and then SMS and confirm with OK.

•

Select Settings and press OK.

•

Select SMS Alert. and press OK.

•

Scroll to Set Alert and press OK.

•

Select the type of alert you want and press OK to confirm or BACK to return to the
previous menu.

•

Select ON or OFF and press OK to confirm the setting.

9.7 MEMORY FULL

When the memory is full, you get the screen message "Memory Full". You can no longer
send or receive SMSs. To continue to receive SMSs, you can delete some or all of the
messages. To delete all the messages stored in the "Inbox" and "Outbox":
•

Select Menu and then SMS and confirm with OK.

•

Select Delete Messages and press OK.

•

Select All Messages with the navigator and press OK.

•

The screen displays: All Messages: Confirm?. Confirm with OK or cancel with Back.

9.8 SMS SERVICE CENTER NUMBERS

To send and receive SMS text messages you need the telephone number of your Network’s
SMS Centre. These numbers have been pre-loaded into the Butler 4570. You can also find
these numbers on the addendum sheet mentioned per country and per operator. If you
accidentally delete the SEND or RECEIVE SMS Service Centre numbers you will need to re-
enter them in order for your SMS Service to work.
The Butler 4570 can store 1 SEND SMS Service center numbers which and 1 RECEIVING
SMS Service center numbers.