TRENDnet TEW-310APBX - Manual (Page 3)

NOTE
3
Note: TEW-310APBX functions just like TEW-310APB and the configuration
procedures are the same as the TEW-310APB. The only difference between the two
models is the TEW-310APBX comes with 2 detachable antennas. Below is the
antenna installation instruction.
You can also replace one of the antennas with a higher gain TRENDnet antenna
(4dBi Indoor Omni Directional, 6dBi Indoor Patch Directional, or 14dBi Outdoor
Directional). At default, both antennas are transmitting/receiving data. When
installing the high gain antenna, you can choose to install it on either the left or right
antenna position. After that, go to the Access Point's configuration page, select
"Advanced Settings", and at the bottom of the page, select the desired antenna
position.
Replacing the antenna with high gain antenna
1 Locate the two antennas
inside the box. 2 Locate antenna connectors
on the unit.
3 Screw in antenna by turning
the kno
b clockwise.
4 The antenna should fit
securely in place.
Connectors
Knob