Recording, Preparing the recording, Simple recording – Technicolor - Thomson NAVICLICK User Manual
Page 16: Recording with automatic stop, S.o.s. record" (snap on-screen) recording, Mark a scene with an index, Ecording
12
Use
J
You can record the pictures and the sound of the TV
programmes or the pictures and the sound of the unit
connected to one of the available AV sockets.
You can't mark or retrieve any index? Check whether the protection tab of the tape is not
broken. Should this be the case, cover the opening with a piece of thick adhesive tape.
Is recording impossible? Check whether the video recorder is switched to Record Pause
(indicated on its display) or to Play.
L
Preparing the recording
1 Load a tape and position it to the desired section where you wish to begin the recording
with keys REW., F.FWD., STOP, PLAY (
23
,
25
,
27
,
24
).
2 Select the channel to be recorded with the key pr+ / pr- (
19
) or the keys 0 to 9 (
21
), or
else select the AV socket to which the unit is connected with key AV (
22
).
J For two-digit channels, first press 0/-- (
21
) before entering the two digits.
3 Select standard play (SP) or long play (LP) with the key sp/lp (
15
).
J You may also use the inner knob JOG fitted to the front of the video recorder to explore an image
by image sequence.
Simple recording
1 Press the key REC (
26
).
ð The video recorder switches on record-pause.
2 Press the key PLAY (
24
).
ð The video recorder starts the recording.
Recording with automatic stop
1 Press key REC (
26
) twice.
2 Enter current programme end time with keys 0 to 9 on the remote control (
21
).
ð The recording will automatically stop at the programmed time.
S.O.S. Record" (Snap On-Screen) recording
J
The S.O.S. Record function enables you to record the programme you are watching on the TV at any
time provided that your television set is fitted with the function NexTView Link (or similar) and that
you have a tape loaded in the video recorder. This function is not available if the video recorder has
already been programmed or is in play mode.
Press the key s.o.s. rec (
14
).
ð The video recorder switches on and automatically changes over to the same channel as the
television set to start recording.
Mark a scene with an index
J
Key index mark (
17
) of the remote control allows you to mark a scene by setting an invisible
electronic index while recording or playing a tape.
1 Start play or recording.
2 Press key index mark (
17
) to add an index
J
To erase the indices, refer to page 18.
R
ecording
r9-GB3-DAE 12/05/2000 18:39 Page 12