Viewing a tape, To view a channel via the video recorder, Iewing a tape – Technicolor - Thomson NAVICLICK User Manual
Page 15
GB
GB
11
Use
J
To view a tape and explore the recordings, to view a still
image and retrieve particular scenes in the accelerated
play mode, to rewind to the beginning or wind fast
forward to the end of the tape.
V
iewing a tape
To view a channel via the video
recorder
1 Switch the television set and the video recorder on.
2 Set the vcr/dvd/tv button to tv, then press the key AV (
22
). The channel picture which
has been selected on the video recorder is displayed on the television screen.
3 Use keys 0 to 9 to change channel or the key pr+/pr- (
19
).
Viewing a tape
Play
1
Load a tape
2
Press key PLAY (
24
).
J
When the picture is poor, adjust the phase (page 20). If the colour is not reproduced
properly, try another standard (PAL, SECAM or MESECAM) selectable in the P
ICTURE
menu (page 21).
Accelerated play
In play mode, press key REW. (
23
) or F.FWD. (
25
) repeatedly to change the speed
and direction of accelerated play.
J
You may also use the SHUTTLE (outer ring) which is situated on the front side of the video
recorder to manipulate accelerated play.
Still image - Pause
In play mode, press key PAUSE (
28
) to pause a picture, and press repeatedly to wind
forward image by image.
Variable slow motion
1
Press the PAUSE (
28
).
2
Press key REW. (
23
) or F.FWD. (
25
) to change the speed and direction of slow
motion.
J
The inner knob JOG fitted to the front of the video recorder may also be used to explore an
image by image sequence in both forward or backward play.
Stop
Press key STOP (
27
) to stop play.
Rewind or Fast Forward
1
Press the key STOP (
27
).
2
Press the keys REW. (
24
) or F.FWD. (
26
).
Ejection of the tape
1
Switch the video recorder to STOP.
2
Press the key EJECT on the front of the video recorder.
J
Jog & Shuttle (outer ring)
(on the front side of the video recorder)
r9-GB3-DAE 12/05/2000 18:39 Page 11