Tyan Computer TYAN S1572 ATX - Manual (Page 29)

29 S1572-001-01 http://www.tyan.com
wPower Management
Options are disabled, user defined, Min saving, and Max saving.
wPM Control by APM
Options are "Yes" and "No". When set for "No", system BIOS will
ignore APM when power managing the system. If set on "Yes" the
system BIOS will wait for APM's prompt before it enters any PM
mode, e.g. Doze, Standby or Suspend.
wVideo Off Method
The "Blank Screen" option will let the system BIOS blanks the screen
when disabling video. V/H SYNC+Blank will let the BIOS turn off the
V-SYNC and H-SYNC signals from the VGA card to the monitor.
4.7.1 Power Management Setup
ROM ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC
Power Management :Disabled Reload Global Timer Events
PM Control By APM :No IRQ (3-7, 9-15), NMI Disable
Video Off Method :Blank Screen Primary IDE 0 Disable
Video Off After :N/A Primary IDE 1 Disable
Doze Mode :Disabled Secondary IDE 0 Disable
Standby Mode :Disabled Secondary IDE 1 Disable
Suspend Mode :Disabled Floppy Disk Disable
HDD Power Down :Disabled Serial Port Disable
Throttle Duty Cycle :62.5% Parallel Port Disable
ZZ Active Monitor :Disable
IRQ8 Clock Event :Disable