Tektronix 200 Series - Manual (Page 22)

2 Network Printing with Tektronix Color Printers
2-10 Network Utilities for Phaser Color Printers
The following table lists the Tektronix printer networking software
according to the tasks required for network conÞguration.
Tektronix printer network software
Task Macintosh Þle PC Þle UNIX Þle
Add/remove
CTRL-D characters
to/from PostScript
Þles None ADDCTRLD.BAT
CTRLD.PS addctrld
delctrld
Authorize TCP/IP
protocol Authorizer AUTHRIZR.EXE authorize-feature*
Change printerÕs
name LaserWriter Utility None None
Download
PostScript Error
handler to printer Tek Error Handler TEKEHAND.PS tekehand.ps
Enable and disable
Þltering of control
characters from
Þles None FILTER.PS
NOFILTER.PS None
Enable and disable
protocol operation Enable EtherTalk
Disable EtherTalk
Enable NetWare
Disable NetWare
Enable TCP-IP
Disable TCP-IP ETALKON.PS
ETALKOFF.PS
NWAREON.PS
NWAREOFF.PS
TCPIPON.PS
TCPIPOFF.PS ethertalk-on.ps
ethertalk-off.ps
netware-on.ps
netware-off.ps
tcp-ip-on.ps
tcp-ip-off.ps
Perform NetWare
conÞguration None Advanced
ConÞguration Tool
(ACT.EXE) None
Print conÞguration
page Print ConÞguration
Page PRNTCNFG.PS prntcnfg.ps
Reset printer Reset Printer RESET.PS reset.ps
Set EtherTalk zone LaserWriter Utility None None
Set TCP/IP device
parameters None None conÞg-IP*
conÞg-LPR*
conÞg-SNMP*
conÞg-sockets*
conÞg-syslog*
*These Þles require that the Þle job-error-handler be installed in the same directory.
The Þle job-error-handler is supplied on the UNIX diskette.