Tektronix 200 Series - Manual (Page 105)

RARP and BOOTP B
User Manual B-5
Here is a sample bootptab Þle; check your host system documentation to see
which Þelds your implementation of BOOTP supports.
# Global entries for all hosts
global: :sm=255.255.255.0:\
:bf=dummyfile:
# Master entries for each subnet template
subnet60: :tc=global:gw=128.07.60.100:
subnet61: :tc=global:gw=128.07.61.150:
# Individual printer entries
P480-mktg: :tc=subnet60:ht=ethernet:\
:ha=080011010045:\
:ip=128.07.60.30:
P480-sales: :tc=subnet60:ht=ethernet:\
:ha=080011010046:\
:ip=128.07.60.31:
The printer recognizes the BOOTP Þelds listed in the following table:
BOOTP Þelds
Field Description Values
gw Gateway address list List of IP addresses separated by
spaces.
ha Host hardware address Hexadecimal; the ha tag must be
preceded by ht tag.
ht Host hardware type (see
Assigned Numbers RFC) Unsigned decimal, octal, or hexadecimal
integer or one of the following symbolic
names:
ethernet or ether for 10 Mbit Ethernet;
ether3 for 3 Mbit experimental Ethernet;
ieee802 for IEEE 802
ip Host IP address A single IP address.
sm Host subnet mask A single IP address.