Targus netlink e340 - Manual (Page 33)

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
Resiliency
If the primary PBX fails and a secondary PBX is configured, any Wireless Telephone
that is configured to be resilient and powered on at the time of failure will switch to the
backup PBX. During the switchover the Wireless Telephone tries to register with each of
the resiliency IP addresses provided by the primary PBX at power on. These are stored in
static memory. If the Wireless Telephone is in a call during the failure of the primary
PBX, it will attempt to register with a backup PBX after the call is completed. Note that
the
End Call button must be pressed at the end of a call to ensure correct functioning of
this feature.
Paging
The Wireless Telephone does not incorporate speakerphone capabilities and therefore
receiving a page is not supported. The user may send a page if this feature has been
programmed.
PN: 72-1084-02-D.doc Page 33