Targus netlink e340 - Manual (Page 22)

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
If you have an OAI Gateway installed in your system, OAI may be optionally enabled in
each Wireless Telephone. You may select whether the Wireless Telephone should
attempt to connect to the SpectraLink OAI Gateway by choosing either the Enable or
Disable options in this menu.
If OAI is enabled, and an OAI IP Address is available to the telephone (either via DHCP
or Static IP configuration), the telephone will communicate with the OAI Server at power
on, and periodically while it is powered on. If you don’t have a SpectraLink OAI
Gateway installed at your site, you should disable the OAI feature to preserve network
bandwidth and battery life.
Admin PW
The Admin PW (password) controls access to the administration functions in the Admin
Menu. The password must be set in each Wireless Telephone for which controlled access
is desired. Wireless Telephones are shipped without any Admin Menu password.
If you exit with no entry, the password is erased and the display will not
require it before displaying the Admin Menu.
PN: 72-1084-02-D.doc Page 22