TP-Link TL-SL3226P - Manual (Page 8)

supports the power cord. Plug-in the female connector of the provided power
cord into this socket, and the male side of the cord into a power outlet.
Supported input voltage range from 110 to 260VAC at 50-60Hz.
The port for connection to the ground
There is a port on the left of the panel for the connection to the ground.
3.2.3 Optional Extension Modules
There are two module extension slots on the front panel of the TL-SL3226P
as the following figure.
When you install any of the modules, you must turn off the power at first. After
you take out the board on the slot, put the module into the extension slot. The
TL-SL3226P can auto-identify the module and configure automatically.
The TL-SL3226P can use with TL-SM201 100M series modules, TL-SM301
Gigabit series modules and TL-SM301GB GBIC cards.
TL-SM201 100M Series Module
!
!
! TL-SM301 Gigabit series module
Caution:
The extension slots with UTP module can support auto-negotiation and auto
MDI/MDIX. These two slots are independent, never conflicting with other
normal ports.
3.3 Remarks
! Pay attention to the stability when you put the TL-SL3226P. It's serious
if the TL-SL3226P drops.
Act
FDX/Col
Link
100M
10M
Act
FDX/Col
1000M
10/100M
Link/Act
TX RX
TL-SL3226P 24+2G Gigabit Managed Switch User's Guide TL-SL3226P 24+2G Gigabit Managed Switch User's Guide
Figure 3-5 Module of the TL-SL3226P
Model No. Standard Interface Network Media Maximum Transfer
Distance
TL-SM201U 100Base-TX RJ-45 Cat 5 UTP/STP 100m
TL-SM201CM 100Base-FX SC 50/125 um MMF
62.5/125 um MMF 2000m
TL-SM201CS-20 100Base-FX SC 9/125 um SMF 20000m
TL-SM201CS-40 100Base-FX SC 9/125 um SMF 40000m
TL-SM201CS-60 100Base-FX SC 9/125 um SMF 60000m
Model No. Standard Interface Network Media Maximum Transfer
Distance
TL-SM301U 1000Base-T RJ-45 Cat 5 UTP 100m
TL-SM301CM 1000Base-SX SC 50/125 um MMF
62.5/125 um MMF 550m
TL-SM301CS 1000Base-LX SC 9/125 um SMF 10000m