TP-Link TL-SL3226P - Manual (Page 11)

The management interface is the menu drive. After you log on, you will in the
first menu as following:
Illumination:
System Configuration includes system information such as
software/hardware version, module information, switch parameter such as
broadcast storm filter mode, file transmission, save and reset.
Ports Management includes port parameter (open/close flow control, port
default VID, port security), port mirror (two types: direction mode mirror and
flow mode mirror), port description (use character string to describe ports),
port statistic (the statistic information of tag forwarding, receiving and
conflicting), port situation (connection situation, port speed, duplex mode)
and port bandwidth (entrance bandwidth and exit bandwidth).
Network includes address parameter (the Ethernet address of the Switch, IP
address, NetMask, Gateway, etc), maximum aging time, Dynamic address
!
table, static address table and filter address table.
The Spanning Tree protocol includes the Switch configuration (Open/Close
Spanning Tree, Network Bridge Priority) and port configuration. (Such as
port priority, situation).
IEEE802.1X protocol includes Switch configuration, port configuration, force
authorized table, force unauthorized table and authorized address table.
VLAN Management includes VLAN mode configuration (Port-based VLAN,
IEEE802.1Q Tag VLAN and VLAN Disable), VLAN configuration and MTU
VLAN team.
Trunk Configuration is to configure and check Trunk.
IGMP includes IGMP Snooping Set and IPMC Group Member Info.
SNMP protocol includes SNMP agent situation, SNMP team name table
(such as access mode, situation), SNMP host table (such as IP address,
team name, situation), SNMP Trap purpose table (purposed IP address, port,
situation), and SNMP system event.
Priority Management includes Port priority, priority mapping, and priority
configuration.
Security Configuration menu is used to configure the user managing the
Switch (such as user's name, password, situation).
Help is used to check the usage of kinds of control button (such as direction
button, TAB button).
TL-SL3226P 24+2G Gigabit Managed Switch User's Guide TL-SL3226P 24+2G Gigabit Managed Switch User's Guide
Figure 4-2 Main Menu