Toshiba 2032SP User Manual
Page 29
Note:
You can automatically receive a call when the Auto-Answer is
activated. However, you cannot disconnect without entering the
password.
Setting the Front Light
1.
Tap ,
then
Settings
. On the
System
tab, tap
Front Light
.
2.
Set the Front Light.
ᮣ
Set the time that elapses until the front light automatically turns off if
the device is not used.
3.
When finished, tap
OK
.
Note:
If the remaining battery power decreases, the brightness level
may be lower than the selected setting.
Section 2: Understanding Your Device
2A: Your Device - The Basics
49
Section 2: Understanding Your Device
48
2A: Your Device - The Basics
Setting Power
To confirm and control power usage:
1.
Tap ,
then
Settings
. On the
System
tab, tap
Power
.
2.
Set Power Options.
ᮣ
When the AC Adapter is used, the battery charging mode is displayed,
but the remaining battery power is not displayed.
ᮣ
Set the time that elapses until the power automatically turns off if the
device is not used.
3.
When finished, tap
OK
.
SPRINT~1-S2Ab.QXD 02.8.6 6:02 PM Page 48