TEN Technology naviPlay Bluetooth Stereo Headset Kit for iPod - Manual (Page 12)

Step 3: Turn on naviPlay Adapter and Headset
Press the Power/Play/Pause button on the naviPlay Headset to turn it on. You should hear the
naviPlay startup tones. Press the Power button on the naviPlay Adapter to turn it on. Turn on the
iPod if it is still off.
Both the naviPlay Headset and the Adapter status lights should blink green and amber at first,
then blink just green once the wireless connection between them has been established.
To preserve the battery charge, turn off the naviPlay devices when not in use. Press and hold
down the POWER button until the status light is constant amber, then release. The adapter also
turns itself off when it has been removed from the iPod after three minutes.
Step 4: Listen to Your Music
Select the audio track or playlist on your iPod and press PLAY/PAUSE on the iPod or naviPlay
Headset. Adjust the volume using the naviPlay Headset volume controls.
Quick Start 12