Connections, Connecting to a tv, Connect the dvd video player to your tv – Toshiba SD-1810 User Manual
Page 16
16
OUT PUT
COMPONENT
Y
L
R
P
B
P
R
S-VIDEO
OPTICAL AUDIO
VEDIO
COAXIAL
DIGITAL
Connecting to a TV
To S
VIDEO
OUT
To VIDEO
OUT
To AUDIO OUT
(red)
(white)
(yellow)
Signal flow
To video input
(red)
(white)
(yellow)
To S video input
Audio/video cable (supplied)
S video cable (not supplied)
To audio inputs
If the TV has an S video input, connect the
DVD video player with an S video cable.
When using an S video cable, do not
connect the yellow video cable.
Set the COMPONENT/S-VIDEO switch to
the S-VIDEO position.
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
TV or monitor with
audio/video inputs
To wall outlet
Connect the DVD video player to your TV.
Connecting to a TV
2B50101A P12-21
8/21/02, 3:27 PM
16