Tascam CD 450 - Manual (Page 11)

TASCAM CD-450
11
Fader Start
You can let the deck go into Play or Ready, as con-
trolled from a fader switch.
Event Start
You can let this deck start playing by inputing a
one-shot pulse signal from the exterior or by short-
circuiting between the tip and sleeve of a stereo
phone plug connected to the FADER/EVENT
START jack.
CAUTION
Do not modify or tamper with this deck. If you fail to
observe this caution, you should prepare to accept
responsibility for all consequences.
Backup Memory
Each time you turn this unit off, the status of the fol-
lowing features are stored in backup memory, so that
they are restored when you turn the unit on again.
… On/Off of REPEAT
… On/Off of SINGLE
… On/Off of INCR PLAY
… On/Off of AUTO READY
… DISPLAY mode (ELAPSED, REMAIN, or TOTAL
REMAIN)
… On/Off of AUTO CUE
… SEARCH MODE
PLAY
READY
RING RING
FADER/EVENT
START connector
TIP TIP
SLEEVE
SLEEVE
+5V
GND
50 ms or more
RING RING
FADER/EVENT
START connector
TIP TIP
SLEEVE
SLEEVE
Operations