Toshiba Strata CTX - Manual (Page 68)

Advanced Operation
Speed Dial
54
Strata CTX DKT/IPT Telephone 11/03
Speed Dial
Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter code.
Dial sequences can include telephone numbers, authorization codes, passwords
feature activation codes and pauses. Speed Dial may be used to originate a call or
invoked after a call is established. There are two types of Speed Dial:
• Station SD – Your CTX System Administrator allocates a block of up to 100
personal SD numbers (10 per telephone). You have exclusive use of them and you
can create and change them from your own telephone.If you have a DKT3014
telephone, you can assign names to your station SD numbers to appear on the
Personal SD Directory display (see your CTX System Administrator or use the
procedure for
“Storing Personal Speed Dial Names” on page 68 .)
• System SD – All telephones in your system can share a list of up to 800 System
Speed Dial numbers under the exclusive control of the CTX System Administrator.
In some cases, System Speed Dial enables you to reach numbers that you would
not be allowed to dial directly from your telephone.
Making a Call Using Speed Dial
There are two ways to begin a Speed Dial Call.
1. Press 6SGLDO on a DKT3000-series digital telephone
...or press the button on any telephone.
2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers
occupy numbers 100~199. System Speed Dial numbers occupy numbers 200~999.
Table 5 Speed Dial Access Codes
Feature Feature Access Code Sequences
Speed Dial (Dialing an SD number)
Station 1
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an
Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).
Tƒqvhy 2 Г + Г
nnn = 100~199 Station SD bin numbers
2. If your telephone does not have a Tƒqvhy button, press the button, then dial the three digit
Speed Dial bin number (nnn).
System
1
Tƒqvhy 2 + Á
nnn = 200~999 System SD bin numbers