Toshiba ZH36 Series - Manual (Page 8)

4
Press OK to select.
Press
R to select System and use P or Q to
change (if required, see page 7).
8
Manual tune
As an alternative to Auto Tuning, the TV can be tuned-in manually using Manual Tuning. For example: if
the television cannot be connected to a video/decoder with a Scart lead or to tune-in a station on another
System (see page 7).
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See page 7.
Search: Search up and down for a signal.
Programme skip: * means nothing has been stored or the facility to skip the channel is ON. See page 9.
Channel: The channel number on which a station is being broadcast.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 10.
Station Name: Station identification. Use the P or Q and S or R buttons to enter up to seven characters.
Station Name Programme System Search Programme skip/
Channel
Manual fine
tuning
Use P or Q to highlight the programme position
required e.g. we suggest Prog. 0 for a video.
Press MENU and using S or R select the Set up
menu, with Q highlight Manual tuning, press R
to select.
Different
Channel
numbers
may be
displayed
Continues on the next page
To allocate a programme position on the television for a decoder and VCR: turn the decoder on, insert a
pre-recorded tape in the video and press PLAY, then manually tune.
Use
S and R to move across the screen and select any of these Manual Tune options.
1
2
3
Set up
Language z English x
Country z GB x
Auto Tuning x
Manual Tuning x
Programme Sorting x
Teletext Mode z List x
EXIT To Exit f e Select z x Adjust
Manual Tuning
f Prog. Channel Station
0 60 VCR
1 22 BBC1
2 28 BBC2
3 25 ITV
4 32 CH4
5 * 69
e
EXIT Watch TV f e Select
MENU Previous z x Change
OK Change
Manual Tuning
System
f
z 0 I 60 0 VCR x
e
EXIT Watch TV z x Select
MENU Previous fe Adjust
OK Store