Topcom 2000 - Manual (Page 62)

63
Butler 2000
63 63 63 63 63
A new handset can only be subscribed to the base unit when the base unit is in sub-
scription mode. Press and hold the Paging button for 15 secs until you hear a beep
tone. The base unit is now in subscription mode.
• Press the Function button until “H-REGISTER”
appears on the display.
• Press the OK button.
• On the display “SEARCH BS 1” is shown.
• Press the Function button.
• The base number changes from 1 to 4.
• As soon as the handset has found the correct
base number, press the OK button.
• When the handset is looking for the base unit,
the RFPI Code is displayed.
• Press the OK button.
• When “PIN : “ is displayed, enter the PIN code of
the base unit (see 5.14).
• After entering the 4 digit PIN code, press the
OK button.
• The unit returns to the “H-REGISTER” menu.
5.4 Desubscribing a Handset
It is possible to terminate the subscription of a handset from the base unit.
This is done by entering the handset number.
• Press the Function button until “BASE SETTING”
is shown on the display.
• Press the OK button.
• Press the Function button until “HANDY DESUB”
is displayed.
• Press the OK button.
• The handset number appears on the display.
• Press the Function button and the handset numbers from 2 to 5 are displayed.
• Press the OK button when the handset number,
that needs to be desubscribed, is shown on the
display, for ex. “HANDY NO : 2”.
SEARCH BS 1
00004--00 :AB
H--REGISTER
PIN:
PIN: ++++
H--REGISTER
BASE SETTING
HANDY DESUB
HANDY NO:2