Temporary disabling of rating level by dvd disc – Toshiba MD20P1 User Manual
Page 41
41
Function setup
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit
28
.
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
If you wish to cancel the set rating level temporarily,
select “Parental Control Level” with
or
, then
press ENTER. If the 4-digit password at step 2 on
page 40 has been set, the password entering
screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or have
forgotten) the password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
ENTER
▲
/
▼
RETURN
0–9
PLAY
OPEN/CLOSE
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
1
Enter the password with Number buttons (0–9).
Then press ENTER.
If you interrupt the entering, press
RETURN.
4
2
3
5
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
Please enter the
4 digit password
9/Cancel/Return
Enter/0
-
RETURN
ENTER
0
8
7
9
6
5
4
3
2
1
ENTER
PLAY
OPEN/CLOSE
OPEN/CLOSE
CH +
CH –
Playback will commence if the entered
password was correct.
Reading
5K50101B [E] (P40-41)
20/4/04, 15:39
41