Perreaux ECD2 - Manual (Page 28)

27
13 13 13 13
Specifications
The ECD2 specifications are detailed in brief and then subsequently in more
detail. In the detailed version, we attempt to explain the significance of each
specification.
The correlation between published specifications and sonic quality can be
unreliable. A list of numbers reveals virtually nothing. All technical
measurements must be subject to qualitative as well as quantitative
interpretation. Measurements of the ECD2 reveal excellent results by any
standards. Tested at 115V and 230V after a 10 minute warm up period.
Specifications
In Brief
Audio Section
Analog Output
Rated Output: ......................................................................................... 2.0V
RMS
Output Impedance:......................................................................................100Ω
Digital Output
Rated Output: ........................................................................................... 0.5V
p-p
Load Impedance:...........................................................................................75Ω
Frequency Response:........................................................ 20Hz to 20kHz, ±0.5dB
Total Harmonic Distortion
(THD+N)
Rated Output: ............................................................................0.004% @ 1kHz
Signal to Noise Ratio
Rated Output: ..........................................................................................>105dB
Dynamic Range: ........................................................................................... 100dB
Channel Separation:........................................................................110dB @ 1kHz
Digital to Analog Converters:............................................................... Dual 20-bit
Digital Filter: ................................................................................8x oversampling
Power Consumption: .......................................................................................20W
Audio Connections
Audio Outputs
Analog: .............................................................................. 1 pair RCA line level
Digital:.........................................................................................75Ω coax RCA
Other Connections
1 x IEC AC mains input receptacle
Mains Input Voltage
100V, 110V, 120V, 220V, 230V or 240V AC at 50Hz or 60Hz
(Set within the ECD2 at time of manufacture)
Dimensions
Width .............................................................................................. 425mm (16.7”)
Height ................................................................................................. 88mm (3.5”)
Depth .............................................................................................. 315mm (12.4”)
(not including feet, terminals and handles)