Perreaux ECD2 - Manual (Page 20)

19
9 9 9 9
Care and Maintenance
The ECD2 has been designed to provide many years of trouble free enjoyment.
Note: Please switch the unit off and remove the cord-set from the rear of the
amplifier before attempting to clean your ECD2 in the manner described
below.
Never apply liquid directly to the ECD2.
Never use abrasives.
Never rub in a circuilar motion.
Cover The cover features a durable, high quality powder-coat finish. To remove finger
marks and dirt, lightly rub the surface with a soft cloth.
If the dirt is not removed, dip your cloth in a mild solution of soap and water,
squeeze excess moisture from it and then gently reapply to the surface.
Stubborn dirt may be removed by the application of a small quantity of
methylated spirits, applied directly to the cleaning cloth only and reworking the
effected area.
Front Panel Black Powder-coat Finish
The front panel is finished in the same durable powder coat as the cover and can
be cleaned in a similar manner, as described above.
Chrome Finish
To remove finger marks and dirt on chrome finishes, lightly rub the surface with
a soft cloth containing a very small quantity of isopropyl alcohol (methylated
spirits) on it.