Install touch screen driver for windows 2000 – TAG MIL-BOOK 100 User Manual
Page 92
Installing Software Drivers
6-5
Install Touch Screen Driver for Windows 2000
1.
Insert the driver CD into the drive.
2.
Click on “TOUCH SCREEN” then “WIN2000”, and follow the
onscreen instructions to continue.
3.
When finished installing, select “Yes” to reboot your system. The
driver should now be loaded.
4.
After the system has finished rebooting, click on the “PenMount
Monitor” icon located on the taskbar to bring up the “PenMount
Control Panel.”
5.
Select the “ Standard Calibrate” folder and click on “OK” button.
6.
If you need 4,9,16,25 dot of the calibrate, we suggest select
“Advanced Calibrate” button to calibrate.
7.
Click on the four sides (points) and the plus-sign “+” on the screen
to calibrate your touchscreen pen for use on the computer.