Timex W-248 - Manual (Page 11)

To Switch Time Zones
The watch can track two time zones (T1 and T2). To look at the second
zone in Time of Day Mode, press START/SPLIT. T1 or T2 will flash in the
lower right corner indicating the alternate time zone. You can switch from
T1 to T2 or T2 to T1 by using these steps:
15 14
Setting Group Adjustment
Appearance of the
Month and Day
Press START/SPLIT (+) or HEART RATE (-) to toggle between
the appearance options for the month and the day. The
options include: Month Day (MM-DD) or Day Month
(DD.MM). For example, March 15 can appear as 3-15 (MM-
DD) or 15.3 (DD.MM).
Hourly Chime
Press START/SPLIT or HEART RATE to toggle between turning
the chime on and off. When turned on, the watch will emit a
beep every hour on the hour.
Button Beep
Press START/SPLIT or HEART RATE to toggle between turning
the button beep on and off. When you turn the button beep
on, the watch will emit a beep every time you press a button
other than the INDIGLO
® button.
Setting Group Adjustment
Hour
Press START/SPLIT (+) to increase the hour value or
HEART RATE (-) to decrease the hour value.
Minute
Press START/SPLIT (+) to increase the minute value or
HEART RATE (-) to decrease the minute value.
Second
Press START/SPLIT (+) or HEART RATE (-) to reset the
seconds to zero.
Month
Press START/SPLIT (+) to move forward through the months
or HEART RATE (-) to move backward through the months.
Day of the Month
Press START/SPLIT (+) to move forward through the days of
the month or HEART RATE (-) to move backward through the
days of the month.
Year
Press START/SPLIT (+) to increase the year value or HEART
RATE (-) to decrease the year value.
12- or 24-Hour
Format
Press START/SPLIT (+) or HEART RATE (-) to toggle between
the 12- and 24-hour formats. In the 12-hour format the AM
and PM time indicators will also appear to the right of the
seconds on the time display.
W248_EU_EN.qxp _TMX_M632 10/5/09 11:11 AM Page 14