Toshiba Multifunctional Digital System GA-1190 - Manual (Page 32)

4 SETUP FLOW
30 Default Setting Check
Default Setting Check
This section describes the items to be set before using this equipment through a network. Check
if the following setups have been done:
Item Description/Reference
Setting the department code The department codes must be set to enable a network printing on a
department basis.
Reference: Operator’s Manual for Copying Functions
Chapter 5 “CHANGING EQUIPMENT’S SETTINGS”
“Department Code”
Setting the paper size for
each drawer Check if the paper size of each drawer of this equipment is specified
prior to network printing.
Reference: Operator’s Manual for Copying Functions
Chapter 5 “CHANGING EQUIPMENT’S SETTINGS”
“Paper Size Setting”
Setting the device settings Check if the device settings are made prior to network printing.
Reference: Setup Guide for Printing Functions
Chapter 10 “TopAccess ADMINISTRATION TAB PAGE-
SETUP MENU (Printing Function)”
“Setting up Device Settings”
“Setting up the device information”
Setting the terminal ID If the Fax Kit and the External Keyboard are installed, specify the termi-
nal ID to identify the Fax terminal information.
Reference: Operator’s Manual for Facsimile Functions
Chapter 5 "ENTERING & SETTING ITEMS"
“Registering the Terminal ID”