Top Innovations SF-475 User Manual

Page 7

Top Innovations, Inc.

FIGURE 3

ATTACHING THE TELESCOPIC POLE

1. Attach Pole Top by sliding it onto top of Telescopic Pole as shown (FIGURE 1).

Note that Pole Top must align correctly in two grooves that run the length of pole.

2. Line up grooves of Telescopic Pole with two tabs inside Pole Base hole, and

insert bottom section of Pole into Base (FIGURE 2).

3. Tighten knob by turning it in a clockwise direction until it is tight, and Telescopic

Pole sits firmly in place in the Pole Base (FIGURE 3).

FIGURE 1

FIGURE 2

EXTENDING TELESCOPIC POLE

1. Locate bottom extension lock, and swing

hinge outward as shown (FIGURE 4).
Extend middle section of Telescopic Pole as
far upward as it will go, then close hinge to
relock bottom extension lock.

2. Repeat Step 1 for remaining two extension

locks, until Telescopic Pole is extended to
it’s full height.

NOTE: It is recommended to extend
Telescopic Pole to it’s full height during
steamer operation. This ensures full
extension of Steam Hose for maximum flow
of steam.

FIGURE 4

SSEMBLING THE

ABRIC

TEAMER