TRENDnet TEG-224WSplus User Manual
Page 20
33
QoS Setting
There are two selections in QoS setting, Port Based and IEEE 802.1p
Based.
Figure 22.
Port Based: to set the Switch QoS by port based, select the ports
which need to higher the quality by changing Normal to High.
Figure 23.
IEEE 802.1p Based: to set the Switch QoS based on IEEE 802.1p,
Figure 24.
34
Device Status
Click on the “Status” to present the device status on this screen, it will
show the System Status, Port Status, VLAN Status, Trunk Status and
Mirror Status.
Figure 25.
Press “Refresh” when you need to renew the posted information.