Power and system leds, Ports 25~26 gigabit status leds – TRENDnet TEG-224WSplus User Manual
Page 11
15
UNDERSTANDING LED INDICATORS
The front panel LEDs provides instant status feedback, and, helps
monitor and troubleshoot when needed.
Figure 5. LED indicators of the Switch
Power and System LEDs
POWER: Power Indicator
On
: When the Power LED lights on, the Switch is receiving power.
Off
: When the Power turns off or the power cord has improper connection.
SYSTEM: Management Indicator
Blinking
: When the CPU is working, the System LED is blinking.
On/Off
: The CPU is not working.
16
Ports 1~24 10/100M Status LEDs
Link/ACT: Link/Activity
On
: When the Link/ACT LED lights on, the respective port is successfully
connected to an Ethernet network.
Blinking : When the Link/ACT LED is blinking, the port is transmitting or
receiving data on the Ethernet network.
Off :
No
link.
100Mbps
On
: When the 100Mbps LED lights on, the respective port is connected to a
100Mbps Fast Ethernet network.
Off
: When the respective port is connected to a 10Mbps Ethernet network
Ports 25~26 Gigabit Status LEDs
mini-GBIC
On
: When the mini-GBIC module is installed, LED will lights on
Off
: No mini-GBIC module is installed
Link/ACT: Link/Activity
On
: When the Link/ACT LED lights on, the respective port is successfully
connected to an Ethernet network.
Blinking : When the Link/ACT LED is blinking, the port is transmitting or
receiving data on the Ethernet network.
Off :
No
link.