Technicolor - Thomson RC5920P - Manual (Page 17)

Chapter 1 15
Connections & Setup
DVD Player + TV + Dolby Pro Logic or Stereo
Receiver
To Connect the DVD Player
1. Connect the left and right audio cables to your audio/video receiver and to the AUDIO OUT FRONT L
(left – white) and R (right – red) jacks on the back of your DVD Player.
2. Connect the video cable.
A. Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
OR
B. S-Video – (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S-
VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV
doesn’t have S-Video, use the basic video connection listed above.
OR
C. Component video (optional) – If your TV has component video (Y, P
B
, and P
R
jacks) use video-grade
cables for the Y, P
B
, and P
R
connections. Note that it is essential to match the color coded connectors
with a compatible TV. If your TV doesn’t have component video, use the basic video connection or the
S-Video connection listed above.
3. Plug in the AC power cord into an AC outlet.
Go to page 20