Technicolor - Thomson RC5920P - Manual (Page 14)

Connections & Setup
12 Chapter 1
Pr
Pb
Y
COMPONENT
VIDEO OUT
S-VIDEO
VIDEO
OUT
VIDEO
AUDIO
OUT
L
R
COAXIAL OPTICAL
R L
VIDEO IN
AUDIO IN
ANT IN S-VIDEO
TV
AUDIO OUT
R L
DVD
PLAYER
R
AUDIO IN
L
DIGITAL
IN
DOLBY DIGITAL or
DTS RECEIVER
CABLE OR
OFF-AIR
SIGNAL
Dolby Digital ® and DTS ®
Both Dolby Digital and DTS are audio formats used to record 5.1-channel audio signals onto the digital track of film (while the film is
being made). Both of these formats provide up to six separate channels: left, right, center, left rear, right rear, and common subwoofer.
The disc will play 5.1-channel sound only if you’ve connected a DTS or Dolby Digital receiver or decoder and if the original movie the
disc was recorded from was encoded in the Dolby Digital or DTS format.
Please Read This Before Using the OPTICAL or COAXIAL Jacks!
This player’s digital output jack is designed for a connection to a Dolby Digital or DTS receiver or decoder. This player has two types
of digital audio out jacks: OPTICAL and COAXIAL. Use the jack (and the corresponding cable) that matches the type of OPTICAL
IN or COAXIAL IN jack your receiver or decoder has.
Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a connection can create a high level of noise
that may be harmful to your ears, and could damage headphones or speakers.
It is important to choose the correct Digital Output setting in the DVD Player’s Digital Audio Out menu, especially when you use the
OPTICAL OR COAXIAL jack. For more information, see chapter 4.
TV
DVD
Dolby Digital or
DTS System
1
3
4
2B
2A